Which valve spring compressor fits my engine?
LS, Gen V LT, SBC, Mopar and Buick tools side by side, and how to tell which head you actually have.
If you are buying a valve spring compressor, the only question that matters is which cylinder head you are working on. The tool that fits an LS1 does not fit a Gen V LT, and a universal compressor that "fits everything" usually fits nothing well. Here is how to pick, from the shop that machines all of these.
THE SHORT VERSION
Gen V LT engine (2014 and newer 5.3, 6.2, LT1, LT2, LT4, LT5, L83, L84, L86, L87, L8T): you need the Gen V tool, our BPPLT1DVST. These heads have a different layout than an LS and a generic LS tool will sit crooked on them.
LS engine (4.8, 5.3, 6.0, LS1, LS2, LS3, and the truck variants): the LS tool, our BPPDVST. It also locks springs on Mopar engines that use the same rocker arrangement.
Small block Chevy, including the older LT1: the SBC tool, our BPPSBCDVST.
Mopar 5.2, 5.9, 318 and 360: the Mopar tool, BPPDVSTD.
Buick Grand National 3.8 turbo: the Buick tool, BPPGNTOOL.
Working on heads off the engine: you do not need a compressor at all if you have a bench spring tool and a stand, but if you are changing springs on a bench, the 360 cylinder head stand, BPPCHES, is what holds the head at an angle you can actually work at.
HOW TO CONFIRM YOUR ENGINE
Do not pick a tool by displacement alone. A 5.3 can be an LS (1999 to 2014 trucks) or a Gen V (2014 and newer), and those two take different tools. The engine code is the reliable answer:
L83, L84, L86, L87 and L8T are Gen V. Use the Gen V tool. LS1, LS2, LS3, LS6, LM7, LR4, LQ4, LQ9 and the rest of the Gen III and Gen IV family are LS. Use the LS tool. LT1 means two completely different engines. The 1992 to 1997 LT1 is a small block and takes the SBC tool. The 2014 and newer LT1 is Gen V and takes the Gen V tool.
If you are not sure, call us at 606-627-7960 with the engine code or the year, make and model, and we will tell you which tool you need before you spend anything.
WHAT TO CHECK BEFORE YOU BUY ANY COMPRESSOR
Does it lock? A compressor that springs back means you are fighting it with one hand while working with the other. Every tool we sell compresses and holds.
Does it index off the head? On Gen V heads in particular, a tool that does not sit flat will cock the retainer and can damage the spring or the head.
Does the hardware come with it? Ours does. Grade 8 bolts and nuts on the LS tool, mounting hardware on the Gen V tool, and a replaceable stud so the wear part is cheap.
Does anyone answer the phone? Ours is a shop in Hinkle, Kentucky. 606-627-7960, Monday through Friday, 9 to 5 Eastern.
Reviewed by Bluegrass Performance, November 2026.
Tools used in this guide
Bluegrass Performance® 4.8 5.3 6.0 LS1 LS2 LS3 Valve Spring Compressor Tool | GM Chevy and Mopar Engines |
SKU: BPPDVST
Add to CartBluegrass Performance® Gen V Valve Spring Compressor Tool for 5.3L, 6.2L L83, L86, LT1, and LT4 Engines
SKU: BPPLT1DVST
Add to CartBluegrass Performance® SBC Small Block 350 Chevy Dual Valve Spring Compressor Tool
SKU: BPPSBCDVST
Add to CartBluegrass Performance® Mopar Dodge Ram 5.2 5.9 318 360 Valve Spring Compressor Tool
SKU: BPPDVSTD
Add to Cart